Author Topic: '59 trim clips- in general  (Read 1309 times)

0 Members and 1 Guest are viewing this topic.

Offline Mick80

  • 62 Series Member
  • *
  • Posts: 25
  • I'm new here
  • Location: Bathurst NSW
  • My Name: Mick
'59 trim clips- in general
« on: May 16, 2015, 01:20:15 PM »
I've just had a bugger of a weekend removing chrome mouldings from the outside of my '59.

Most were rusted in place and were slit with the dremel to make removal possible.

When it comes to re-assembly, are most of these clips standard issue GM stuff or most of them special?

I know the 'alligator' type clip for the chrome moulding on the flat section of the rear quarter window are worth an arm and a leg on evilbay, but how will I go with the rest of them.

Any hints on removal of rusted, rounded phillips head screws other than WD40, wire brushing and yelling?

Cheers
1959 6 window Sedan Deville

Offline Bruce Reynolds

  • Club Member
  • Brougham Member
  • **
  • Posts: 1273
Re: '59 trim clips- in general
« Reply #1 on: May 16, 2015, 04:28:09 PM »
I can go with the yelling, but if you can get access to the heads with a good pair of vice grips, you will be surprised what you can move.

Bruce. :devil:
Bruce Reynolds, Lindisfarne, TASMANIA
'72 Eldorado Convertible (LHD)
'70 Ranchero Squire (RHD)
'74 Chris Craft Gull Wing (SH)
(Past President Modified Chapter)

Offline Phil Weber

  • 62 Series Member
  • *
  • Posts: 26
  • I'm new here
  • Location: Sydney
  • My Name: Phil
Re: '59 trim clips- in general
« Reply #2 on: June 03, 2016, 09:01:28 AM »
I've used this mob . Might have want you want . Very helpful and reasonably priced . www.zollschrauben.indupla.de/ . Or Google "House Of Clips " . They specialise in clips for classic American cars . Located in Germany .

Phil