Author Topic: REMOVING STAINLESS TRIMS AROUND THE WINDSCREEN!!!  (Read 2479 times)

0 Members and 1 Guest are viewing this topic.

Offline 55coupedeville

  • DeVille Member
  • **
  • Posts: 53
REMOVING STAINLESS TRIMS AROUND THE WINDSCREEN!!!
« on: November 21, 2011, 08:09:28 PM »
hi all...., cant get the centre trim from around the windscreen, the one at the top, off... i have all the rest off, but i dont want to damage this one...... any ideas????

Offline pdm59

  • Fleetwood Member
  • ***
  • Posts: 108
Re: REMOVING STAINLESS TRIMS AROUND THE WINDSCREEN!!!
« Reply #1 on: November 22, 2011, 06:00:36 AM »
Check to see that it has not been siliconed on at some stage, if so get a peice of mig welding wire and slide it behind the mould and gently peel like a cheese cutter pulling the mig wire side to side.

Cheers Paul

Offline ColonelZ

  • Fleetwood Member
  • ***
  • Posts: 160
  • Melb
Re: REMOVING STAINLESS TRIMS AROUND THE WINDSCREEN!!!
« Reply #2 on: November 22, 2011, 09:17:19 PM »
You might have to remove the front of the headlining at the top of the windscreen, then you will see the small nuts holding on the windscreen trim. First remove the interior trim at the top of the windscreen, the rear view mirror and then all the little staples holding on the headlining. That's what its like on my 59, could be the same
Rob
Robert
59 Coupe Deville
Melb
CLC Member

Offline 55coupedeville

  • DeVille Member
  • **
  • Posts: 53
Re: REMOVING STAINLESS TRIMS AROUND THE WINDSCREEN!!!
« Reply #3 on: December 07, 2011, 07:51:56 PM »
ah good idea, thanks i will give it a go!!!